New development of retail box technology and requirements of end users to more advanced and efficient queue display and display products may be the signal the demise of the standard light  box technology.

  So, what is this new technology brings to the table?

  1. Significantly reduce energy consumption, the translation of dramatic dollar savings

  2. Significantly reduce hidden and ongoing maintenance and maintenance costs

  3. Thin light boxes, save space and improve the customer experience and perception, your brand

  4. Improved advertising effect, the more bright, more uniform illumination

  5. Meet the needs of consumers and the regulatory requirements of environmental protection and retail

  Who will be left behind?

  The traditional retail stores or light box is effective for years. They are simple structure, they are no more complex than just as its name implies, box, lighting and. They are usually 200 mm ( 8 inch ) thick fabricated of aluminum. In some of the fluorescent tube is installed in the manufacturing and illuminates a graphics application in polypropylene face on one side or both sides of the lamp box.

  The traditional light boxes are still commonly used today, to be effective, because they had. The problem is, the world and the expectations of consumers has gone, leaving the old technology in many fields.

The scrolling light boxes in our lives also plays a large role in

  The first of these traditional stores Lightbox really chewing through power supply. A large light box 6 x 3 meter ( about 20 x 10 feet ) requires 45 x 58 watt fluorescent tube, effectively illuminate. Such a light box, run for 12 hours, with about 12000 kilowatts, equivalent to an annual electricity bill and more than $1000. Just a light box!

  Maintenance is also a problem, seems to be the problem of business owners use these traditional style box. Just a mistake in your light box can make it look good, the best average. And the possibility of definitive, a fault at any given time, when you have 45 or more fluorescent tube lighting single lamp box, is quite high. Flicker or broken pipes quickly became a considerable cost, so it is common to see this type of lamp box and a patch or shadow on the surface. The defective performance have a negative impact on consumer perception of the brand, not to mention a significantly reduced effect, your logo or advertising its " professional, " is not bright.

  New technology! But buyer beware

  New players in the light box display market edge lit or thread technology. The term refers to the light, the light source means is applied directly to the edge of the one internal acrylic panel, front surface light due to the matrix pattern is printed on the surface.

  The matrix model of key factors on the effectiveness of ultra-thin light boxes. Introduction of acrylic panel light reflective mode and exit through the front face, thereby illuminating any poster or graphic in the face. Effective optical mode operation using the algorithm, calculation of the light evenly distributed over the entire group. Essentially these patterns reflect less light near the edge of the acrylic panel, the light source and light at the application level is the highest, and the lighter center, at the group level is the lowest. And an effective diffusion models of peripheral acrylic sheet, will be bright, the center will be dark.

  Let me take this opportunity to remind you (! ) There are plenty of cheap, ultra-thin light boxes on the market using substandard product is the result of light pattern. Ensure supplier understand the operation of matrix model, ultra-thin light boxes and can guarantee that your product procurement legalization mode.